Centrecourt
Pro Acrylic Surface Systems
Acrylic
Resurfacer, Product Specifications
Centrecourt
Pro Acrylic Crack & Leveling Compoud, Product
Specifications
Centrecourt
Pro Cushoning System, Product Specifications
Centrecourt
Pro Acrylic Colour System, Product Specifications
Acrylic
Resurfacer, Product Specifications
 Description
and Usage
Centrecourt Pro Acrylic Resurfacer
provides an economical means for filling and levelling
surface depressions in new or existing tarmac or concrete
surfaces, prior to the application of the Centrecourt
Pro Acrylic Colour System. Basically levels the surface,
using self-levelling properties.
Mix Design
Mix thoroughly
to insure uniform consistency.
| |
Patching |
Coating |
| Centrecourt Pro Acrylic Resurfacer |
19 litres |
208.17 litres |
| Portland 1A Cement |
2.5 litres |
-0- |
| Potable Water |
2 litres |
100 litres |
| 60 mesh, clean, dry, Silica Sand |
22.67 - 45.35 kg (50-100lbs) |
-0- |
| 80-100 mesh, clean, dry, Silica Sand |
35 kgs |
180 kgs |
|
Application
Refer to the Court Surface Guideline
for surface preparation procedures. Application requires
the use of a 60 cm to 120 cm long, flexible 50 to 70
durometer, rubber squeegee of good quality and in good
condition.
Coverage
0.18 – 0.36 litres per square
metre. Coverage rate will vary depending upon surface
porosity.
Drying
Time
30 – 90 minutes in optimum conditions.
Humidity, surface temperature and ambient temperature
will affect drying process.
Limitations
and Precautions
Centrecourt Pro Acrylic Resurfacer
should not be applied when the ambient temperature is
below 100C (500F) or when surface temperature is above
600C (1400F). Do not apply when rain is imminent. Do
not store in direct sunlight. Keep from freezing.
|
